[1] |
杨胜强, 李文辉, 李秀红, 等. 高性能零件滚磨光整加工研究进展 [J]. 表面技术,2019,48(10):13-24.YANG Shengqiang, LI Wenhui, LI Xiuhong, et al. Research development of mass finishing for high-performance parts [J]. Surface Technology,2019,48(10):13-24.
|
[2] |
杨万辉, 朱静宇, 陈雷, 等. 整体叶盘疲劳失效分析与抗疲劳强化技术应用 [J]. 金属加工(冷加工),2019(9):43-46.YANG Wanhui, ZHU Jingyu, CHEN Lei, et al. Fatigue failure analysis of integral blisk and application of anti-fatigue strengthening technique [J]. Metal Working (Metal Cutting),2019(9):43-46.
|
[3] |
黄春峰. 航空发动机整体叶盘结构及发展趋势 [J]. 现代零部件,2005(4):96-98, 100-101.HUANG Chunfeng. Structure and development trend of aero-engine blisk [J]. Modern Components,2005(4):96-98, 100-101.
|
[4] |
黄云, 肖贵坚, 邹莱. 整体叶盘抛光技术的研究现状及发展趋势 [J]. 航空学报,2016,37(7):2045-2064.HUANG Yun, XIAO Guijian, ZOU Lai. Research status and development trend of blisk polishing technology [J]. Journal of Aeronautics,2016,37(7):2045-2064.
|
[5] |
杨万辉, 徐新发, 杨金发. 整体叶盘先进制造技术应用与发展 [J]. 世界制造技术与装备市场,2019(2):69-72.YANG Wanhui, XU Xinfa, YANG Jinfa. Application and development of advanced manufacturing technology for integral blisk [J]. World Market for Manufacturing Technology and Equipment,2019(2):69-72.
|
[6] |
肖贵坚. 整体叶盘型面开式砂带精密磨削方法及其实验研究 [D]. 重庆: 重庆大学, 2016.XIAO Guijian. Experimental research on the precision grinding method of blisk with open-loop abrasive belt [D]. Chongqing: Chongqing University, 2016.
|
[7] |
WANG Y M, YANG J X, LI D W, et al. Tool path generation with global interference avoidance or the robotic polishing of blisks [J]. The International Journal of Advanced Manufacturing Technology, 2021, 117(3/4): 1223-1232.
|
[8] |
FU Y Z, GAO H, WANG X P, et al. Blade surface uniformity of blisk finished by abrasive flow machining [J]. The International Journal of Advanced Manufacturing Technology,2016,84(5/8):1725-1735.
|
[9] |
杨胜强, 李文辉, 陈红玲, 等. 表面光整加工理论与新技术 [M]. 北京: 国防工业出版社, 2011.YANG Shengqiang, LI Wenhui, CHEN Hongling, et al. Surface finishing theory and new technology [M]. Beijing: National Defense Industry Press, 2011.
|
[10] |
徐泳, 孙其诚, 张凌, 等. 颗粒离散元法研究进展 [J]. 力学进展,2003,33(2):251-260. doi: 10.3321/j.issn:1000-0992.2003.02.010XU Yong, SUN Qicheng, ZHANG Ling, et al. Advances in particle discrete element method [J]. Advances in Mechanics,2003,33(2):251-260. doi: 10.3321/j.issn:1000-0992.2003.02.010
|
[11] |
HASHEMNIA K, POURANDI S. Study the effect of vibration frequency and amplitude on the quality of fluidization of a vibrated granular flow using discrete element method [J]. Powder Technology,2018,327:335-345. doi: 10.1016/j.powtec.2017.12.097
|
[12] |
LI W H, ZHANG L, LI X H, et al. Theoretical and simulation analysis of abrasive particles in centrifugal barrel finishing: Kinematics mechanism and distribution characteristics [J]. Powder Technology,2017,318:518-527. doi: 10.1016/j.powtec.2017.06.033
|
[13] |
HAO Y P, YANG S Q, LI X H, et al. Analysis of contact force characteristics of vibratory finishing within pipe-cavity [J]. Granular Matter, 2021, 23(2).
|
[14] |
NAEINI S E, SPELT J K. Development of single-cell bulk circulation in granular media in a vibrating bed [J]. Powder Technology,2011,211(1):176-186. doi: 10.1016/j.powtec.2011.04.018
|
[15] |
LI X H, LI W H, YANG S Q, et al. Study on polyurethane media for mass finishing process: Dynamic characteristics and performance [J]. International Journal of Mechanical Science,2018,138:250-261.
|
[16] |
DA SILVA MACIEL L, SPELT J K. Influence of process parameters on average particle speeds in a vibratory finisher [J]. Granular Matter,2018,20(4):1-11.
|
[17] |
DA SILVA MACIEL L, SPELT J K. Comparison of DEM predictions and measured wall-media contact forces and work in a vibratory finisher [J]. Powder Technology 2020, 366: 434–447.
|
[18] |
郭鹏辉, 李文辉, 李秀红, 等. 一维振动式滚磨光整加工颗粒流场的离散元模拟分析 [J]. 机械科学与技术,2021,40(7):1037-1042.GUO Penghui, LI Wenhui, LI Xiuhong, et al. Discrete element simulation analysis of particle flow field in one-dimensional vibration rolling finishing process [J]. Mechanical Science and Technology for Aerospace Engineering,2021,40(7):1037-1042.
|
[19] |
李鹏, 李文辉, 李秀红, 等. 航空发动机整体叶盘回转式滚磨光整加工数值模拟与分析 [J]. 机械科学与技术,2021,40(4):633-640.LI Peng, LI Wenhui, LI Xiuhong, et al. Numerical simulation and analysis of rotary-typed mass finishing for aeroengine blisk [J]. Mechanical Science and Technology for Aerospace Engineering,2021,40(4):633-640.
|
[20] |
苏文飞. 整体叶盘大尺寸扭曲通道电解预加工试验研究 [D]. 南京: 南京航空航天大学, 2017.SU Wenfei. Experimental investigation of electrochemical machining for large size twisted blisk cascade passage [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2017.
|
[21] |
张荔, 李文辉, 杨胜强. 滚磨光整加工中磨料颗粒堆积角的离散元参数标定 [J]. 中国科技论文,2016,11(16):1821-1825. doi: 10.3969/j.issn.2095-2783.2016.16.006ZHANG Li, LI Wenhui, YANG Shengqiang. Discrete element parameter calibration of abrasive particle stacking angle in barrel finishing [J]. Chinese Scientific Papers,2016,11(16):1821-1825. doi: 10.3969/j.issn.2095-2783.2016.16.006
|