Citation: | WANG Youzhe, LIU Yao, ZHOU Yang, LI Jiahao, LI Hansen. Experiment on single diamond abrasive scratching 2D SiCf/SiC composite materials[J]. Diamond & Abrasives Engineering, 2024, 44(3): 335-345. doi: 10.13394/j.cnki.jgszz.2023.0275 |
[1] |
WANG P, LIU F, WANG H, et al. A review of third generation SiC fibers and SiCf/SiC composites [J]. Journal of Materials Science & Technology,2019,35(12):2743-2750.
|
[2] |
WANG X, DING W, ZHAO B. A review on machining technology of aero-engine casings [J]. Journal of Advanced Manufacturing Science and Technology,2022,2(3):2022011. doi: 10.51393/j.jamst.2022011
|
[3] |
BRENNAN J J. Interfacial characterization of a slurry-cast melt-infiltrated SiC/SiC ceramic-matrix composite [J]. Acta Materialia,2000,48(18):4619-4628.
|
[4] |
CHAMBERLAIN A, LANE J. SiC/SiC ceramic matric composites: A turbine engine perspective: Proceedings of engineering conferences international in ultra-high temperature ceramics: Materials for extreme environmental application II [C]. Hernstein: ECI Digital Archives, 2014.
|
[5] |
MURTHY P L N, NEMETH N N, BREWER D N, et al. Probabilistic analysis of a SiC/SiC ceramic matrix composite turbine vane [J]. Composites Part B: Engineering,2008,39(4):694-703. doi: 10.1016/j.compositesb.2007.05.006
|
[6] |
SCHMIDT S, BEYER S, KNABE H, et al. Advanced ceramic matrix composite materials for current and future propulsion technology applications [J]. Acta Astronautica,2004,55(3/4/5/6/7/8/9):409-420.
|
[7] |
KATOH Y, KOYANAGI T, MCDUFFEE J L, et al. Dimensional stability and anisotropy of SiC and SiC-based composites in transition swelling regime [J]. Journal of Nuclear Materials,2018,499:471-479. doi: 10.1016/j.jnucmat.2017.12.009
|
[8] |
程功, 肖军. 高超音速飞行器热防护材料技术分析 [J]. 航空制造技术,2015,58(S2):43-45.
CHENG Gong, XIAO Jun. Technical analysis of thermal protection materials for hypersonic aircraft [J]. Aviation Manufacturing Technology,2015,58(S2):43-45.
|
[9] |
AN Q, CHEN J, MING W, et al. Machining of SiC ceramic matrix composites: A review [J]. Chinese Journal of Aeronautics,2021,34(4):540-567. doi: 10.1016/j.cja.2020.08.001
|
[10] |
GAVALDA DIAZ O, GARCIA LUNA G, LIAO Z, et al. The new challenges of machining ceramic matrix composites (CMCs): Review of surface integrity [J]. International Journal of Machine Tools and Manufacture,2019,139:24-36. doi: 10.1016/j.ijmachtools.2019.01.003
|
[11] |
GAVALDA DIAZ O, AXINTE D A, BUTLER-SMITH P, et al. On understanding the microstructure of SiC/SiC ceramic matrix composites (CMCs) after a material removal process [J]. Materials Science and Engineering A,2019,743:1-11. doi: 10.1016/j.msea.2018.11.037
|
[12] |
YIN J, LI M, XU J, et al. Edge chipping characteristics in grinding SiCf/SiC composite [J]. Ceramics International,2022,48(5):7126-7135. doi: 10.1016/j.ceramint.2021.11.272
|
[13] |
YIN J, XU J, DING W, et al. Effects of grinding speed on the material removal mechanism in single grain grinding of SiCf/SiC ceramic matrix composite [J]. Ceramics International,2021,47(9):12795-12802. doi: 10.1016/j.ceramint.2021.01.140
|
[14] |
殷景飞, 徐九华, 丁文锋, 等. SiCf/SiC 陶瓷基复合材料单颗磨粒磨削试验研究 [J]. 中国机械工程, 2022, 33 (15): 1765-1771.
YIN Jingfei, XU Jiuhua, DING Wenfeng, et al. Experimental study on single abrasive grinding of SiCf/SiC ceramic matrix composites [J] China Mechanical Engineering, 2022, 33 (15): 1765-1771.
|
[15] |
GARCIA L G, DRAGOS A, DONKA N. Influence of grit geometry and fibre orientation on the abrasive material removal mechanisms of SiC/SiC ceramic matrix composites (CMCs) [J]. International Journal of Machine Tools and Manufacture,2020,157:103580. doi: 10.1016/j.ijmachtools.2020.103580
|
[16] |
LIU Y, QUAN Y, WU C, et al. Single diamond scribing of SiCf/SiC composite: Force and material removal mechanism study [J]. Ceramics International,2021,47(19):27702-27709. doi: 10.1016/j.ceramint.2021.06.195
|
[17] |
LI H, PRINZ S, LIU Y, et al. Experiment and smooth particle hydrodynamic modeling of single-grain diamond scribing of silicon carbide fiber reinforced silicon carbide (SiCf/SiC) [J]. CIRP Annals, 2023.
|
[18] |
ZAN Z, GUO K, SUN J, et al. Investigation on scratching force and material removal mechanism of 3D SiCf/C–SiC composites during single grain scratching [J]. Journal of the European Ceramic Society,2022,42(13):5366-5379. doi: 10.1016/j.jeurceramsoc.2022.05.079
|
[19] |
DONG Z, ZHANG H, KANG R, et al. Mechanical modeling of ultrasonic vibration helical grinding of SiCf/SiC composites [J]. International Journal of Mechanical Sciences,2022,234:107701. doi: 10.1016/j.ijmecsci.2022.107701
|
[20] |
RAN Y, KANG R, DONG Z, et al. Ultrasonic assisted grinding force model considering anisotropy of SiCf/SiC composites [J]. International Journal of Mechanical Sciences,2023,250:108311. doi: 10.1016/j.ijmecsci.2023.108311
|
[21] |
康仁科, 赵凡, 鲍岩, 等. 超声辅助磨削SiCf/SiC 陶瓷基复合材料 [J]. 金刚石与磨料磨具工程, 2019, 39 (4): 85-91.
KANG Renke, ZHAO Fan, BAO Yan, et al. Ultrasonic assisted grinding of SiCf/SiC ceramic matrix composites [J] Diamond & Abrasives Engineering, 2019, 39 (4): 85-91.
|
[22] |
XIONG Y F, LIU C, WANG W H, et al. Assessment of machined surface for SiCf/SiC ceramic matrix composite during ultrasonic vibration-assisted milling-grinding [J]. Ceramics International,2023,49(3):5345-5356. doi: 10.1016/j.ceramint.2022.10.058
|
[23] |
ZHANG Q, WANG B, SONG C, et al. Processing strategy of SiCf/SiC composites during single grain scratching under minimum quantity lubrication [J]. The International Journal of Advanced Manufacturing Technology,2023,131(5/6):2477-2495.
|
[24] |
袁钦, 宋永才. 连续 SiC 纤维和 SiCf/SiC 复合材料的研究进展 [J]. 无机材料学报, 2016, 31 (11): 1157-1165.
YUAN Qin, SONG Yongcai. Research progress on continuous SiC fibers and SiCf/SiC composites [J] Journal of Inorganic Materials, 2016, 31 (11): 1157-1165.
|
[25] |
HINOKI T, LARA-CURZIO E, SNEAD L L. Mechanical properties of high purity SiC fiber-reinforced CVI-SiC matrix composites [J]. Fusion Science and Technology,2003,44(1):211-218. doi: 10.13182/FST03-A336
|
[26] |
李文鹏, 沈兴全, 郐红艺, 等. 纤维角度和切削深度对碳纤维复合材料切削性能的影响仿真 [J]. 工具技术,2017,51(8):64-67. doi: 10.3969/j.issn.1000-7008.2017.08.016
LI Wenpeng, SHEN Xingquan, KUAI Hongyi, et al. Simulation of the influence of fiber angle and cutting depth on the cutting performance of carbon fiber composite materials [J]. Tool Technology,2017,51(8):64-67. doi: 10.3969/j.issn.1000-7008.2017.08.016
|