Citation: | SUN Yongguo, WANG Wei, LI Wenzhi, WEI Hengju, WEI Shiliang. Surface micromorphology of Si3N4 ceramic by rotating ultrasonic grinding based on fractal theory[J]. Diamond & Abrasives Engineering, 2024, 44(3): 382-390. doi: 10.13394/j.cnki.jgszz.2023.0103 |
[1] |
ZHANG Z, SHI K, HUANG X, et al. Development of a probabilistic algorithm of surface residual materials on Si3N4 ceramics under longitudinal torsional ultrasonic grinding [J]. Ceramics International,2022,48(9):12028-12037. doi: 10.1016/j.ceramint.2022.01.060
|
[2] |
KUMAR K, KIM M J, PARK Y J, et al. Twofold increase in Weibull modulus of hot-pressed Si3N4 ceramic by modified pressing profile [J]. Materials Today Communications,2022(32):103979. doi: 10.1016/j.mtcomm.2022.103979
|
[3] |
MOZAMMEL M, MORSHEDO M S, MD K, et al. Prediction and optimization of surface roughness in minimum quantity coolant lubrication applied turning of high hardness steel [J]. Measurement,2018(118):43-51.
|
[4] |
全书海. 基于表面灰度图像的加工表面形貌分形特征研究 [D]. 武汉: 武汉理工大学, 2003.
QUAN Shuhai. Research on fractal features of machined surface morphology based on surface grayscale images [D]. Wuhan: Wuhan University of Technology, 2003.
|
[5] |
李静, 尹衍升, 马来鹏, 等. 分形理论在陶瓷材料断裂行为中的应用 [J]. 稀有金属材料与工程,2007(S1):707-710.
LI Jing, YIN Yansheng, MA Laipeng, et al. Application of fractal theory in the fracture behavior of ceramic materials [J]. Rare Metal Materials and Engineering,2007(S1):707-710.
|
[6] |
奚欣欣, 丁文锋, 傅玉灿, 等. 颗粒增强钛基复合材料高速磨削表面分形分析 [J]. 金刚石与磨料磨具工程,2014,34(6):26-29, 33.
XI Xinxin, DING Wenfeng, FU Yucan, et al. Surface fractal analysis of particle reinforced titanium matrix composites during high-speed grinding [J]. Diamond and Abrasives Engineering,2014,34(6):26-29, 33.
|
[7] |
邹明清. 分形理论的若干应用 [D]. 湖北: 华中科技大学, 2007.
ZOU Mingqing. Several applications of fractal theory [D]. Hubei: Huazhong University of Science and Technology, 2007.
|
[8] |
吴丁贵. 基于分形几何理论表面粗糙度测量系统的研究 [D]. 厦门: 厦门大学, 2014.
WU Dinggui . Research on surface roughness measurement system based on fractal geometry theory [D]. Xiamen: Xiamen University, 2014.
|
[9] |
张彦斌, 林滨, 梁小虎, 等. 基于分形理论表征工程陶瓷磨削表面 [J]. 硅酸盐学报,2013,41(11):1558-1563.
ZHANG Yanbin, LIN Bin, LIANG Xiaohu, et al. Characterization of engineering ceramic grinding surface based on fractal theory [J]. Journal of Silicates,2013,41(11):1558-1563.
|
[10] |
NI X, SUN J, MA C, et al. Wear model of a mechanical seal based on piecewise fractal theory [J]. Fractal and Fractional,2023,7(3):251. doi: 10.3390/fractalfract7030251
|
[11] |
王洪娇, 秦襄培. 涂层表面形貌的分形表征研究 [J]. 机械,2020,47(11):71-75. doi: 10.3969/j.issn.1006-0316.2020.11.011
WANG Hongjiao, QIN Xiangpei. Fractal characterization of coating surface morphology [J]. Machinery,2020,47(11):71-75. doi: 10.3969/j.issn.1006-0316.2020.11.011
|
[12] |
SHAO C X, GUO H, MENG S H, et al. Characterization of ceramic thermal shock cracks based on the multifractal spectrum [J]. Fractal and Fractional,2022,6(10):539. doi: 10.3390/fractalfract6100539
|
[13] |
宋伟杰, 庞弘阳, 关山, 等. 基于多重分形谱参数的刀具磨损状态特征提取 [J]. 东北电力大学学报,2019,39(1):35-40.
SONG Weijie, PANG Hongyang, GUAN Shan, et al. Feature extraction of tool wear state based on multifractal spectral parameters [J]. Journal of Northeast Electric Power University,2019,39(1):35-40.
|
[14] |
徐善华, 夏敏. 锈蚀钢材表面的分形维数与多重分形谱 [J]. 材料导报,2020,34(16):16140-16143. doi: 10.11896/cldb.19070257
XU Shanhua, XIA Min. fractal dimension and multifractal spectrum of corroded steel surface [J]. Materials Herald,2020,34(16):16140-16143. doi: 10.11896/cldb.19070257
|
[15] |
董中林, 汪祚远, 施毅, 等. 基于多重分形谱的粗糙模拟表面分析 [J]. 真空,2016(6):59-62.
DONG Zhonglin, WANG Zuoyuan, SHI Yi, et al. Rough simulation surface analysis based on multifractal spectra [J]. Vacuum,2016(6):59-62.
|
[16] |
王和旭. Si3N4 陶瓷旋转超声磨削表面摩擦磨损特性研究 [D]. 哈尔滨: 哈尔滨工程大学, 2015.
WANG Hexu. Study on the surface friction and wear characteristics of Si3N4 ceramic during rotary ultrasonic grinding [D]. Harbin: Harbin Engineering University, 2015.
|
[17] |
魏士亮. Si3N4旋转超声磨削加工表面微观形貌创成机理及优化技术 [D]. 哈尔滨: 哈尔滨工程大学, 2016.
WEI Shiliang. Mechanism and optimization technology of surface micromorphology formation in Si3N4 rotary ultrasonic grinding process [D]. Harbin: Harbin Engineering University, 2016.
|
[18] |
樊福梅, 梁平, 吴庚申. 基于分形盒维数的汽轮机转子振动故障诊断的实验研究 [J]. 核动力工程,2006(1):85-89.
FAN Fumei, LIANG Ping, WU Gengshen. Experimental study on fault diagnosis of steam turbine rotor vibration based on fractal box dimension [J]. Nuclear Power Engineering,2006(1):85-89.
|
[19] |
淦犇, 黄宜坚. 铣削加工表面轮廓的几何分形特征 [J]. 华侨大学学报,2010,31(4):371-377.
GAN Ben, HUANG Yijian. Geometric fractal features of surface profile in milling [J]. Journal of Huaqiao University,2010,31(4):371-377.
|
[20] |
王雯朝. 加工表面形貌特征仿真与切削参数影响规律研究 [D]. 陕西: 西安理工大学, 2016.
WANG Wenchao. Research on the simulation of surface morphology characteristics and the influence of cutting parameters in nachining [D] Shanxi: Xi’an University of Technology, 2016.
|
[21] |
MIAO B, WANG X, Li H. Quantitative analysis of infrared thermal images in rock fractures based on multi-fractal theory [J]. Sustainability,2022,14(11):6543. doi: 10.3390/su14116543
|
[22] |
杨红平, 傅卫平, 王雯, 等. 基于分形几何与接触力学理论的结合面法向接触刚度计算模型 [J]. 机械工程学报,2013,49(1):102-107. doi: 10.3901/JME.2013.01.102
YANG Hongping, FU Weiping, WANG Wen, et al. Calculation model of normal contact stiffness of joint surface based on fractal geometry and contact mechanics theory [J]. Journal of Mechanical Engineering,2013,49(1):102-107. doi: 10.3901/JME.2013.01.102
|
[23] |
周兴林, 肖神清, 刘万康, 等. 沥青路面表面纹理的多重分形特征及其磨光行为 [J]. 东南大学学报(自然科学版),2018,48(1):175-180. doi: 10.3969/j.issn.1001-0505.2018.01.027
ZHOU Xinglin, XIAO Shenqing, LIU Wankang, et al. Multifractal characteristics and polishing behavior of asphalt pavement surface texture [J]. Journal of Southeast University (Natural Science Edition),2018,48(1):175-180. doi: 10.3969/j.issn.1001-0505.2018.01.027
|