CN 41-1243/TG ISSN 1006-852X

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

水溶性造孔剂在超薄树脂切割砂轮中的应用

李大水 杜晓旭 曹剑锋 陈怀亮 王思亮 吴磊涛 羊松灿 郝素叶 杨剑锋

李大水, 杜晓旭, 曹剑锋, 陈怀亮, 王思亮, 吴磊涛, 羊松灿, 郝素叶, 杨剑锋. 水溶性造孔剂在超薄树脂切割砂轮中的应用[J]. 金刚石与磨料磨具工程, 2022, 42(4): 449-456. doi: 10.13394/j.cnki.jgszz.2021.4002
引用本文: 李大水, 杜晓旭, 曹剑锋, 陈怀亮, 王思亮, 吴磊涛, 羊松灿, 郝素叶, 杨剑锋. 水溶性造孔剂在超薄树脂切割砂轮中的应用[J]. 金刚石与磨料磨具工程, 2022, 42(4): 449-456. doi: 10.13394/j.cnki.jgszz.2021.4002
LI Dashui, DU Xiaoxu, CAO Jianfeng, CHEN Huailiang, WANG Siliang, WU Leitao, YANG Songcan, HAO Suye, YANG Jianfeng. Application of water-soluble pore-forming agent in ultra-thin resin cutting grinding wheel[J]. Diamond & Abrasives Engineering, 2022, 42(4): 449-456. doi: 10.13394/j.cnki.jgszz.2021.4002
Citation: LI Dashui, DU Xiaoxu, CAO Jianfeng, CHEN Huailiang, WANG Siliang, WU Leitao, YANG Songcan, HAO Suye, YANG Jianfeng. Application of water-soluble pore-forming agent in ultra-thin resin cutting grinding wheel[J]. Diamond & Abrasives Engineering, 2022, 42(4): 449-456. doi: 10.13394/j.cnki.jgszz.2021.4002

水溶性造孔剂在超薄树脂切割砂轮中的应用

doi: 10.13394/j.cnki.jgszz.2021.4002
详细信息
    通讯作者:

    李大水,男,1989年生,工程师。主要研究方向:超硬材料及制品。E-mail: lds@zzsm.com

    通信作者:杨剑锋,男,1970年生,副教授。主要研究方向:工业工程、质量管理。E-mail: jianfengyang@zzu.edu.cn

  • 中图分类号: TQ164; TG74

Application of water-soluble pore-forming agent in ultra-thin resin cutting grinding wheel

  • 摘要: 为进一步提升超薄树脂切割砂轮的自锐性能和排屑容屑能力,在切割砂轮中加入水溶性造孔剂NaCl,研究其含量对超薄树脂切割砂轮的微观形貌、力学性能及切割性能的影响。结果表明:当造孔剂添加体积分数为10%时,砂轮中的孔隙均匀适中,其切割效率最高,进给速度最高可达20 mm/s。但加入造孔剂会对砂轮的抗折性能和切割寿命产生一定影响,造孔剂含量越高,抗折性能越低,切割寿命越短。

     

  • 图  1  超薄树脂切割砂轮结块SEM形貌

    Figure  1.  SEM morphology of agglomeration of ultra-thin resin cutting grinding wheel

    图  2  试验样条成品

    Figure  2.  Test spline

    图  3  造孔剂造孔原理图

    Figure  3.  Schematic diagram of pore preparation of pore-forming agent

    图  4  不同样条及NaCl造孔剂的SEM形貌

    Figure  4.  SEM morphologies of different strips and NaCl pore-forming agent

    图  5  不同样条的抗折强度

    Figure  5.  Flexural strengths of different strips

    图  6  8#切割砂轮成品

    Figure  6.  8# finished cutting wheel

    图  7  陶瓷板的切割

    Figure  7.  Cutting of ceramic plate

    图  8  不同进给速度下5种砂轮样品的主轴电流

    Figure  8.  Spindle currents of five kinds of grinding wheel samples at different feed speeds

    表  1  试验样条配方

    Table  1.   Test spline formula

    编号酚醛树脂
    体积分数
    Vb / %
    白刚玉
    体积分数
    VA / %
    石墨
    体积分数
    VC / %
    金刚石
    体积分数
    Vd / %
    造孔剂
    体积分数
    Vp / %
    1#5555350
    2#5055355
    3#45553510
    4#40553515
    5#35553520
    下载: 导出CSV

    表  2  切割砂轮切削齿的高度差

    Table  2.   Height differences of cutting teeth of cutting wheels

    砂轮
    编号
    第1次
    Δh1 / mm
    第2次
    Δh2 / mm
    第3次
    Δh3 / mm
    第4次
    Δh4 / mm
    第5次
    Δh5 / mm
    第6次
    Δh6 / mm
    平均值
    Δh / mm
    6#0.0200.0180.0220.0250.0210.0250.022
    7#0.0240.0220.0220.0240.0210.0270.023
    8#0.0200.0300.0260.0250.0250.0320.026
    9#0.0310.0330.0250.0310.0270.0320.030
    10#0.0360.0280.0330.0340.0350.0380.034
    下载: 导出CSV
  • [1] 叶晓川, 史冬丽, 曾黎明, 等. 耐热酚醛树脂金刚石砂轮的磨削性能研究 [J]. 超硬材料工程,2010,22(3):11-15. doi: 10.3969/j.issn.1673-1433.2010.03.003

    YE Xiaochuan, SHI Dongli, ZENG Liming, et al. Study on grinding performance of heat-resistant phenolic resin bond diamond grinding wheels [J]. Superhard Material Engineering,2010,22(3):11-15. doi: 10.3969/j.issn.1673-1433.2010.03.003
    [2] 张虹. 晶圆贴膜金刚刀划片工艺 [J]. 宁夏工程技术,2012,11(1):43-45. doi: 10.3969/j.issn.1671-7244.2012.01.014

    ZHANG Hong. Dicing technology of wafer-bonded diamond blade [J]. Ningxia Engineering Technology,2012,11(1):43-45. doi: 10.3969/j.issn.1671-7244.2012.01.014
    [3] 孟庆辉, 李印江. 磨料磨具技术手册 [M]. 北京: 兵器工业出版社, 1993.

    MENG Qinghui, LI Yinjiang. Technical manual of abrasive tools [M]. Beijing: Ordnance Industry Press, 1993.
    [4] 廖翠姣. 多孔金属结合剂金刚石砂轮的开发研究 [D]. 泉州: 华侨大学, 2006.

    LIAO Cuijiao. The development of porous metal bonded diamond grinding wheels [D]. Quanzhou: Huaqiao University, 2006.
    [5] 张习敏, 王明智, 王艳辉. 不同造孔剂对陶瓷结合剂性能的影响 [J]. 金刚石与磨料磨具工程,2005,131(5):19-22.

    ZHANG Ximin, WANG Mingzhi, WANG Yanhui. Effect of different pore-forming agents on properties of ceramic bond [J]. Diamond & Abrasives Engineering,2005,131(5):19-22.
    [6] 王超超, 张凤林, 李伟雄, 等. 空心玻璃微珠对陶瓷结合剂金刚石砂轮微观结构和力学性能的影响 [J]. 工具技术,2017,51(10):36-39. doi: 10.3969/j.issn.1000-7008.2017.10.009

    WANG Chaochao, ZHANG Fenglin, LI Weixiong, et al. Effect of glass bubble as pore former on micro-structure and mechanical properties of vitrified bond diamond grinding wheels [J]. Tool Engineering,2017,51(10):36-39. doi: 10.3969/j.issn.1000-7008.2017.10.009
    [7] HOU Y G, QIAO G Y, SHANG Y, et al. Effect of porosity on the grinding performance of vitrified bond diamond wheels for grinding PCD blades [J]. Ceramics International,2012,38(8):6215-6220. doi: 10.1016/j.ceramint.2012.04.074
    [8] 左宏森, 关春龙. 造孔剂对金属结合剂金刚石磨具力学性能的影响 [J]. 金刚石与磨料磨具工程,2009,173(5):82-85. doi: 10.3969/j.issn.1006-852X.2009.05.018

    ZUO Hongsen, GUAN Chunlong. Effect of pore-forming agents on mechanical properties of metal-bonded diamond wheels [J]. Diamond & Abrasives Engineering,2009,173(5):82-85. doi: 10.3969/j.issn.1006-852X.2009.05.018
    [9] 李敏, 胡玲. CBN多孔砂轮制备方法与修整技术的研究进展 [J]. 金属材料与冶金工程,2016,3(2):8-14.

    LI Min, HU Ling. Progress of fabrication and dressing methods for CBN porous grinding wheel [J]. Metal Materials and Metallurgy Engineering,2016,3(2):8-14.
    [10] 梁述举. 多孔金属结合剂研究与超硬磨具制备 [D]. 秦皇岛: 燕山大学, 2020.

    LIANG Shuju. Study on porous metal bond and preparation of super hard abrasive [D]. Qinghuangdao: Yanshan University, 2020.
    [11] 陈卫东, 涂俊群. 不同的造孔剂对陶瓷结合剂cBN砂轮性能的影响 [J]. 超硬材料工程,2014,26(3):1-5. doi: 10.3969/j.issn.1673-1433.2014.03.001

    CHEN Weidong, TU Junqun. Influence of different type of pore former on the mechanical property of vitrified bond cBN grinding wheel [J]. Superhard Material Engineering,2014,26(3):1-5. doi: 10.3969/j.issn.1673-1433.2014.03.001
    [12] 张元松, 王绍斌, 张梦婷, 等. 不同添加物对金属结合剂金刚石超薄砂轮胎体性能的影响 [J]. 矿冶工程,2013,33(3):113-116. doi: 10.3969/j.issn.0253-6099.2013.03.031

    ZHANG Yuansong, WANG Shaobin, ZHANG Mengting, et al. Effects of various additives on mechanical properties of ultra-thin metal-bonded diamond grinding wheel body [J]. Mining and Metallurgical Engineering,2013,33(3):113-116. doi: 10.3969/j.issn.0253-6099.2013.03.031
  • 加载中
图(8) / 表(2)
计量
  • 文章访问数:  463
  • HTML全文浏览量:  151
  • PDF下载量:  68
  • 被引次数: 0
出版历程
  • 收稿日期:  2021-11-07
  • 修回日期:  2022-03-25
  • 网络出版日期:  2023-02-07
  • 刊出日期:  2022-08-10

目录

    /

    返回文章
    返回