Effect of Cu-Ce alloy on property of Fe-based metal bond
-
摘要: 为进一步改善铁基金属结合剂的性能,以Cu-Ce合金、铁、锡、铜等为原料,采用热压烧结法制备金属结合剂,研究Cu-Ce合金对结合剂性能的影响。结果表明:随Cu-Ce合金粉质量分数的增加,铁基金属结合剂的密度、抗冲击强度均逐渐增加,而抗弯强度和洛氏硬度则表现出先增大后减小的趋势。当Cu-Ce合金的质量分数为8%时,洛氏硬度(HRB)达到最大;Cu-Ce合金的质量分数为6%时,抗弯强度最大,为518.12 MPa。在铁基金属结合剂中添加Cu-Sn合金粉会降低其各项力学性能。Abstract: To further enhance the property of Fe-based metal bond,Cu-Ce alloy,Fe,Sn and Cu are used to prepare different types of metal bond by hot pressing,thus studying the effect of Cu-Ce alloy on property of the bond.The results show that density and impact strength of the bond increase as the content of Cu-Ce alloy increases,while the bending strength and Rockwell hardness increase and then decrease.It is concluded that HRB reaches its top value when the mass fraction of Cu-Ce alloy is 8%,and that the bending strength increases to its maximum,namely 518.12 MPa when Cu-Ce mass fraction is 6%.It is also found that adding Cu-Sn alloy reduces mechanical property of Fe-based metal bond.
-
Key words:
- Cu-Ce alloy /
- Fe-based bond /
- impact strength /
- flexural strength
点击查看大图
计量
- 文章访问数: 164
- HTML全文浏览量: 44
- PDF下载量: 10
- 被引次数: 0