[1] |
蔡家品, 贾美玲, 沈立娜, 等. 难钻进地层金刚石钻头的现状和发展趋势 [J]. 探矿工程(岩土钻掘工程),2017,44(2):67-73.CAI Jiapin, JIA Meiling, SHEN Lina, et al. Present situation of diamond bit used in difficult drilling formations and the development trend [J]. Exploration Engineering (Rock & Soil Drilling and Tunneling),2017,44(2):67-73.
|
[2] |
XU J, SHEIKH A H, XU C. Interfacial failure modelling of diamond bits made of particulate composites [J]. Composite Structures,2016,155:145-159. doi: 10.1016/j.compstruct.2016.07.075
|
[3] |
赵小军, 段隆臣, 契霍特金 V F, 等. 金属胎体对金刚石把持力的概述 [J]. 金刚石与磨料磨具工程,2015,35(6):41-46. doi: 10.13394/j.cnki.jgszz.2015.6.0009ZHAO Xiaojun, DUAN Longchen, Чихоткин В Ф, et al. Summary on holding force of metallic matrix to diamond [J]. Diamond & Abrasives Engineering,2015,35(6):41-46. doi: 10.13394/j.cnki.jgszz.2015.6.0009
|
[4] |
WEBB S W. Diamond retention in sintered cobalt bonds for stone cutting and drilling [J]. Diamond and Related Materials,1999,8(11):2043-2052. doi: 10.1016/S0925-9635(99)00167-3
|
[5] |
HAN P, XIAO F, ZOU W, et al. Effect of different oxides addition on the thermal expansion coefficients and residual stresses of Fe-based diamond composites [J]. Ceramics International,2014,40(3):5007-5013. doi: 10.1016/j.ceramint.2013.08.080
|
[6] |
HU H, CHEN W, DENG C, et al. Effect of matrix composition on the performance of Fe-based diamond bits for reinforced concrete structure drilling [J]. International Journal of Refractory Metals and Hard Materials,2021,95:105419. doi: 10.1016/j.ijrmhm.2020.105419
|
[7] |
CHEN C, LIU X, ZHOU F, et al. Effect of basalt fiber on the microstructure and holding strength of sintered WC-based diamond composite [J]. International Journal of Refractory Metals and Hard Materials,2021,99:105600. doi: 10.1016/j.ijrmhm.2021.105600
|
[8] |
邹庆化, 汤凤林, 杨凯华, 等. 热压金刚石工具材料及其致密化 [J]. 中国有色金属学报,2001,11(S2):119-126. doi: 10.3321/j.issn:1004-0609.2001.z2.027ZOU Qinghua, TANG Fenglin, YANG Kaihua, et al. Hot pressed sintered matrix composites for diamond tools and its densification [J]. The Chinese Journal of Nonferrous Metals,2001,11(S2):119-126. doi: 10.3321/j.issn:1004-0609.2001.z2.027
|
[9] |
刘广志. 金刚石钻探手册[M]. 北京: 地质出版社, 1991: 114.LIU Guangzhi. Diamond drilling handbook [M]. Beijing: Geological Publishing House, 1991: 114.
|
[10] |
黄漫, 陈哲, 王凤荣, 等. 孕镶金刚石工具中金刚石与胎体间机械包镶力的研究 [J]. 金刚石与磨料磨具工程,2004(4):43-45. doi: 10.3969/j.issn.1006-852X.2004.04.012HUANG Man, CHEN Zhe, WANG Fengrong, et al. Study on mechanical retention of matrix to impregnated diamond [J]. Diamond & Abrasives Engineering,2004(4):43-45. doi: 10.3969/j.issn.1006-852X.2004.04.012
|
[11] |
董洪峰, 路阳, 李文生, 等. 粉末冶金Fe基孕镶金刚石刀头的热处理强化 [J]. 粉末冶金技术,2012,30(4):288-292. doi: 10.3969/j.issn.1001-3784.2012.04.008DONG Hongfeng, LU Yang, LI Wensheng, et al. Heat treatment strengthening of P/M iron-based impregnated diamond segment [J]. Powder Metallurgy Technology,2012,30(4):288-292. doi: 10.3969/j.issn.1001-3784.2012.04.008
|
[12] |
董洪峰, 郭从盛. Fe-Cu基金刚石复合材料超薄锯片的界面性能 [J]. 粉末冶金材料科学与工程,2015,20(2):213-217. doi: 10.3969/j.issn.1673-0224.2015.02.010DONG Hongfeng, GUO Congsheng. Interfacial properties of Fe-Cu based diamond composite ultra thin saw blade [J]. Materials Science and Engineering of Powder Metallurgy,2015,20(2):213-217. doi: 10.3969/j.issn.1673-0224.2015.02.010
|
[13] |
BOROWIECKA J J, LACHOWSKI J. The effect of the properties of the metal matrix on the retention of a diamond particle [J]. Metalurgija,2017,56(1/2):83-86.
|
[14] |
REIS L, AMARAL P M, LI B, et al. Evaluation of the residual stresses due to the sintering process of diamond-metal matrix hot-pressed tools [J]. Theoretical and Applied Fracture Mechanics,2008,49(2):226-231. doi: 10.1016/j.tafmec.2007.11.007
|
[15] |
姜传海, 王德尊, 姚忠凯. 颗粒增强金属基复合材料热错配应力分析 [J]. 金属学报,2000,36(5):555-560. doi: 10.3321/j.issn:0412-1961.2000.05.022JIANG Chuanhai, WANG Dezun, YAO Zhongkai. Analysis of thermal mismatch stress in the particle reinforced composite [J]. Acta Metallurgica Sinica,2000,36(5):555-560. doi: 10.3321/j.issn:0412-1961.2000.05.022
|
[16] |
LEE E. Thermal stress and strain in a metal matrix composite with a spherical reinforcement particle [J]. Metallurgical Transactions A,1992,23:2205-2210. doi: 10.1007/BF02646013
|
[17] |
BOROWIECKA J J, LACHOWSKI J. An analysis of the retention of a diamond particle in a metallic matrix after hot pressing [J]. Archives of Foundry Engineering,2017,17(1):17-20. doi: 10.1515/afe-2017-0003
|
[18] |
REEBER R R, WANG K. Thermal expansion, molar volume and specific heat of diamond from 0 to 3000 K [M]. New York: Institute of Electrical and Electronics Engineers, 1996.
|